PDR glue pulling: what do I need to get started?
For PDR glue pulling (paintless dent repair) you need a pulling tool, glue tabs, the right glue, isopropyl alcohol for cleaning and something that lets you see the dent. With cold glue, there is no glue gun and no waiting time.
In short
- Must-haves: slide hammer, glue tabs, glue, 99% isopropyl alcohol, microfibre cloth.
- Seeing: PDR reflector or reflector board – you read dents through the reflection.
- Finishing: knockdown for high spots.
- Cold glue pulling: no glue gun, no waiting time.
- Test before buying everything: cold glue trial set.

What is PDR glue pulling?
With glue pulling, the dent is pulled from the outside: a glue tab is glued onto the dent and pulled out with a pulling tool. The advantage: you do not need access to the back of the panel, trim and interior parts stay in place. There are two variants – cold glue with aluminium tabs and hot glue with tabs that are usually made of plastic.
The shopping list
| What | What for | At Makmayer |
|---|---|---|
| Pulling tool | pulls the tab and the dent out | Slide hammer PitPull V2, 1–1.2 kg |
| Glue tabs | glued onto the dent | cold glue tabs S–XL + Crease or PrismTabs for hot glue |
| Glue | connects tab and panel | cold glue Summer/Winter or hot glue König Honig |
| Cleaning | degrease tab and panel, remove residue | 99% isopropyl alcohol (from retail) + microfibre cloth |
| Seeing | make the dent visible through reflection | PDR reflector (mobile) or reflector board (workshop) |
| Finishing | knock down high spots after pulling | knockdown set, blending hammer |
For hot glue you also need a glue gun. With cold glue you don't.
Why cold glue to get started?
- No glue gun, no melting, no waiting time – place and pull.
- Low consumption: one 8 g tin lasts at least 1–2 years of active use.
- Durable tabs made of aluminium instead of plastic tabs that eventually break.
- On suitable, soft dents such as hail damage, in our experience at least two to three times faster than hot glue.
For sharp dents and creases, hot glue with tabs is worth adding later – most technicians use both.
Which set suits you?
| Your situation | Suitable set |
|---|---|
| Try cold glue first | Cold glue trial set (1 glue + 1 tab) |
| Slide hammer available, adding cold glue pulling | Cold glue Summer or Winter + 5 tabs – or both glues + 5 tabs |
| Starting from scratch | Cold Glue Complete Set: PitPull V2, Summer and Winter cold glue, five tabs, case |
In the case of the Complete Set every part has its place; tabs can be stored even with cold glue applied. Because the tabs are universal, the glue-and-tab sets also work with a slide hammer you already own.
Frequently asked questions
What do I need at minimum for glue pulling?
A pulling tool (e.g. slide hammer), glue tabs, suitable glue, 99% isopropyl alcohol and a microfibre cloth. To see the dent, a PDR reflector or reflector board.
Do I need a glue gun for cold glue?
No. Cold glue is worked directly into the tab – no gun and no waiting time.
Can I use the tabs with my existing slide hammer?
Usually yes: Makmayer cold glue tabs fit practically any slide hammer.
Cold glue or hot glue for beginners?
Cold glue needs no glue gun and no waiting time, and the tabs last a long time. Hot glue with tabs can be added later for sharp dents and creases.
Ready to start?
The Complete Set gives you slide hammer, both cold glues and all five tabs in one case.