Glue tabs: which size for which dent?
Makmayer cold glue tabs come in five sizes: S (16 mm), M (23 mm), L (30 mm), XL (approx. 40 mm) and Crease (10 × 40 mm) for long dents. You choose by the size and shape of the dent; S to XL are fairly versatile. For hot glue there are separate tabs, the PrismTabs.
In short
- Cold glue tabs (aluminium): S 16 mm, M 23 mm, L 30 mm, XL approx. 40 mm, Crease 10 × 40 mm.
- PrismTabs for hot glue (plastic): hexagon 8, 10, 13 mm, square 25 × 8, rhomb 25 × 15 mm.
- Size by dent size, shape by dent shape – long dents: Crease.
- Both systems are universal and fit practically any slide hammer.

First: cold glue or hot glue?
Cold glue and hot glue need different tabs. Cold glue tabs are made of aluminium and carry a thin layer of glue that lasts a long time – some technicians use it for over a month. Hot glue tabs such as PrismTabs are made of plastic and are loaded with fresh hot glue for every pull.
Cold glue tabs: five sizes
| Size | Gluing surface | Colour |
|---|---|---|
| S | 16 mm round | gold |
| M | 23 mm round | orange |
| L | 30 mm round | red |
| XL | approx. 40 mm round | pink |
| Crease | 10 × 40 mm, elongated – for long, stretched dents | violet |
The tabs are made of aluminium with a stainless steel cap and do not wear out like plastic tabs. They are universal and fit practically any slide hammer – you are not tied to Makmayer tools. On the PitPull V2 the tab can also be screwed directly into a dedicated head, where it sits completely fixed.
PrismTabs for hot glue
| PrismTab | Shape / size |
|---|---|
| S | hexagon 8 mm |
| M | hexagon 10 mm |
| L | hexagon 13 mm |
| Square | 25 × 8 mm |
| Rhomb | 25 × 15 mm |
PrismTabs are made of high-quality plastic, come in packs of 10 and are reusable until they break – usually for many pulls. They also fit practically all pulling tools. To get to know them, there is a mix pack with two of each shape.

Rules of thumb
- Size: the tab should match the size of the dent.
- Shape: for long, stretched dents there is the Crease tab for cold glue.
- Dent type: soft dents rather cold glue, sharp dents and creases rather hot glue with tabs.
Frequently asked questions
What sizes do Makmayer cold glue tabs come in?
S 16 mm, M 23 mm, L 30 mm, XL approx. 40 mm (round) and Crease 10 × 40 mm (elongated).
Will Makmayer tabs fit my slide hammer?
Usually yes: cold glue tabs and PrismTabs are universal and fit practically any slide hammer.
Which tab for long dents?
With cold glue, the Crease tab (10 × 40 mm).
All sizes at once
The glue-and-tab sets contain all five tab sizes – with Summer glue, Winter glue or both.